FORTZA STEEL / EN
FORTZA STEEL machinery catalogue: Bystronic, Adige, Vicla, Amada equipment and company-published specifications.
15 / CATALOGUE ENTRIES
Sheet and tube lasers, press brakes, punching, slitting and profiling lines. Open a machine page for process, specifications and quotation details.
Final parameters are confirmed after reviewing the technical drawing, material and project requirements. Data and photographs come from the company’s published catalogue.
01 / Bending & forming
CNC press brake for sheet-metal bending. FORTZA's catalogue lists a 4,000 mm length and thickness up to 6 mm.
Processable thickness depends on material, tooling and bending length; the force rating and exact model are not published.
02 / Cutting & slitting
Guillotine for sheet-metal cutting. FORTZA lists a 4,000 mm length and thickness up to 8 mm.
The catalogue does not identify the model or material grade; compatibility is confirmed at quotation.
03 / Laser cutting
Sheet-metal laser equipment with a published 4,000 × 2,000 mm format. FORTZA lists thickness up to 10 mm, subject to project review.
The 4020 designation does not identify laser power or generation. Current ByStar Fiber performance is not attributed to this machine.
04 / Bending & forming
CNC wire-bending machine identified in the catalogue as Wafios BM4. The manufacturer's tooling documentation includes the BM family, type 4.
The full diameter range and permissible strength require confirmation of tooling and material. An unconfirmed lower limit or strength without a unit is not published.
05 / Laser cutting
Laser for round, square, rectangular, oval and elliptical tubes and hollow sections, according to FORTZA's catalogue.
FORTZA lists a 120 mm maximum diameter, 6,500 mm loading and 3,000 mm unloading. These lengths describe the published configuration and are not replaced with data from a different Lasertube.
06 / Cutting & slitting
Adige TC720 tube-cutting equipment. The catalogue lists diameters from 12 to 80 mm and a feed capacity expressed as a mass of 4,000 kg.
The kg figure is not a feed speed or hourly output. The loader model and exact configuration are not published.
07 / Bending & forming
Ficep type A31 punching and drilling line, as listed in the company inventory.
The catalogue does not specify force, hole diameters or maximum dimensions. Datasheets for other FICEP lines are not used to fill those values.
08 / Cutting & slitting
Automatic coil straightening, cutting and slitting line. The 0.8–8 mm range and 1,500 mm maximum width also appear in FORTZA's announcement of 30 June 2023.
09 / Bending & forming
Euromac CX750/30 CNC punching machine. FORTZA lists 300 kN, a 750 × 1,250 mm work area or 750 × 2,500 mm with repositioning, and sheet thickness up to 6 mm.
Permissible thickness is reviewed against material, tooling and hole geometry. The manufacturer's history confirms the CX family, without certifying the installed machine.
10 / Bending & forming
Automatic roll-forming lines for open sections. The company catalogue gives scaffolding work platforms as an example.
Sections, materials, thicknesses and lengths are reviewed per component; no verified numerical limits are publicly available.
11 / Cutting & slitting
Plasma and oxyfuel cutting on Messer equipment, with a 12,000 × 3,000 mm format published in the company catalogue.
The catalogue does not distinguish plasma and oxyfuel thicknesses or identify the source or material. Processing thickness is confirmed separately for the requested process.
12 / Bending & forming
Amada CNC press brake with robot. FORTZA lists a 2,700 mm working length and thickness up to 5 mm.
The model is not identified. This figure is not automatically equated with beam length or frame spacing from other AMADA datasheets.
13 / Bending & forming
Equipment listed as 'Valt' in the catalogue, for sheet bending and rolling, with length up to 2,000 mm and thickness up to 5 mm.
'Valt' does not reliably identify the manufacturer or model and is not presented as a verified brand.
14 / Bending & forming
Robotic tube-bending machine for which FORTZA publishes a maximum bending diameter of 30 mm.
Manufacturer, bend radius, wall thickness and materials are not specified. A matching diameter alone is not used to assign another model's specifications.
15 / Cutting & slitting
Automatic saw for tubes and sections, listed by FORTZA as Pegas Gonda 240×280 A-CNC-R-Fs.
The manufacturer's archive confirms the 240×280 A-CNC-R family and variants. The installed suffix and options are unconfirmed; numbers in the name are not presented as universal cutting capacity.
LET’S MAKE IT HAPPEN
Share your technical requirements. We will identify the appropriate process together.